Lipstick Mould - 3 cavity
This brilliant 3 cavity lipstick mould is brilliant for the home crafter who wishes to create their own lipsticks. Please make sure your lipstick base is sufficiently cooled before pouring or it will leak.
12mm mould to fit 12.1mm tubes
Grease the inside of the mould with an oily cloth
Place the two halves tightly together and secure with a rubber band
Pour the lipstick mix into the cavities while still quite liquid
When set enough to be moved transfer it to the fridge and leave it there at least 30 minutes.
Remove from fridge and gently separate the halves.
With a gloved hand, push the base gently to unmould it.
Use as is with a rounded tip, or cut to a point with a sharp knife if you prefer the pointed tip look.
Use a 12.1mm lipstick tube - roll the inner sleeve all the way to the top before securely inserting your completed lipstick.
Roll back down and push the over cap firmly in place.